If you are working in the steel industry, then you must already know just how important it is for you to organize the process of steel making perfectly and make sure that there are no issues throughout. This is basically your main task, but you need to have quite a lot of knowledge in order to fulfill such a task. For starters, you will need to have a steelmaking method chosen, because there is no point in doing anything without having the proper method. Here is a popular one you might want to consider.
The reason why I am mentioning those methods is because I want to point out that the Basic Oxygen Furnace, also known as the Basic Oxygen Process (BOP) is one of the highly popular methods used in the steelmaking industry nowadays. Given that you are here, it is probably safe to assume that you are familiar with this specific method, at least to a certain extent. There is one thing, though, that’s making you slightly confused and that you want to clear up.
In short, I am talking about the concept of the dolomite lime. There is a chance that you don’t really know what it is, why you should use it, or where to get it in the first place. Well, those are all some valid question and I am sure that getting the answers is necessary for you, as you don’t want to embark on the actual steelmaking process and use the dolomite dime without really knowing what it is that you are doing.
Instead, you want to know precisely what you are doing at all times, which is why getting properly informed is of utmost importance. Well, the good news is that you will get informed right now. In different words, you will get your answers to those questions what we have mentioned above and you will, thus, learn what the dolomite lime is, why you should think of using it, as well as where to get it.
This can help you start the learning process: https://www.homequestionsanswered.com/what-is-dolomitic-limestone.htm
What Is Dolomite Lime?
We are, unsurprisingly, going to begin with the most basic question here, because you need to find out precisely what a dolomitic lime is in order to decide whether it might be useful for you or not. There would be no point in jumping right towards talking about where to get it if you don’t really have a clue what it is. I am guessing, though, that you are fine with this order of things and that you understand the importance of learning what the dolomite lime is before going any further.
So, dolomitic lime is a calcium magnesium carbonate that contains around 20% of calcium and around 10% of magnesium. Those percentages can, however, vary quite a lot, so make sure to always check with your supplier. Dolomite is a limestone that is used quite often in gardening, but it can also be of great help in the steelmaking process. The fact that it is used so much just shows how great it is, because people certainly wouldn’t add it to their gardens if it had a negative effect.
We are not here, though, to talk about its use in gardening. As we have mentioned above, your interest goes into a slightly different direction and you want to find out why using this lime in steelmaking could be a good idea. Well, that’s the next question that I am going to answer for you, so do keep on reading to find out what you want to know.
Why Use It?
The dolomitic lime is used to increase the level of MgO (magnesium oxide) in the steelmaking process, which is responsible for reducing the tendency of slag to actually dissolve the magnesium oxide from the furnace refractory. This is important because it can prevent melt-throughs and thus protect the actual refractory. If you have been in this industry for some time, then you are bound to understand the importance of that, which further means that you understand the need to use dolomitic lime in this entire process.
Where To Get It?
If it is now clear to you why this is used in the steelmaking process, you are bound to start wondering where you can get it. Well, I have briefly mentioned suppliers previously, so let me now make things even clearer for you. Basically, the most significant thing to do here is find the right supplier and thus get the best possible product for you. In order to find the right supplier, you’ll have to do quite some research before making any choices, while putting great focus on checking their reputation, as well as the level of their experience. Of course, you should also check the prices before making your decisions.
